Plumbing problems are commonplace considering how it is one of the most frequently used systems in the home. The only notable difference of one plumbing complication to another is the severity of the problem, as this could range from minor to catastrophic. However, the progress from a simple problem to an emergency can be heavily influenced by how you take care of your plumbing. Neglect and misuse can easily make minor issues exacerbated and subsequently lead to exorbitant repairs. Therefore, it is critical for all homeowners to take note of any mistakes they may be making on a day-to-day basis if they would like to keep their plumbing system in good working condition. The following are a few of the mistakes that are decreasing the efficiency of your plumbing.
Utilising the wrong type of plunger
A plunger is one of the staple tools homeowners own for DIY plumbing fixes. Nonetheless, not many people are aware that they will require two different plungers depending on where the blockage is. Plungers that are designed to unblock toilets have a distinctive half-ball design that is connected to a wide tube. This configuration facilitates higher suction, making it easier to dislodge toilet clogs.
Sink plungers, on the other hand, have a half-circle design so that the wide mouth can easily be fitted over the drain. If you have been using a sink plunger to try to unblock your toilets chances are you have been making the drainage problems worse rather than rectifying them.
Procrastinating maintenance of your water heater
For most homeowners, their go-to mantra for household appliances is "if it isn't broke, don't fix it". This approach may seem to be a cost-efficient one, as you will not be spending money on your household systems and appliances on a regular basis. However, what you are not factoring in is that without adequate maintenance, appliances are more susceptible to malfunctioning, which would be pricier than routine maintenance in the long run.
Your hot water system is one such appliance that will require regular care if it is to stay functioning at optimum. Not only are hot water systems used on a daily basis, but they also generate a lot of heat, and the high temperatures could end up damaging some of the internal components. Having your plumber give your hot water system a once-over on occasion allows for problems to be spotted early and fixed in good time.